How to make ninja in little alchemy 1

In the original Little Alchemy game (Little Alchemy 1), you can create various elements by combining different basic elements. To make a “ninja” in Little Alchemy 1, follow these steps:

1. Combine “Human” and “Weapon” to create “Ninja.”

That’s it! By combining “Human” with “Weapon,” you will successfully create a “Ninja” in the game. Enjoy experimenting with different combinations to discover all the elements in Little Alchemy 1.

how to make nitrocellulose lacquer

Creating nitrocellulose lacquer involves handling potentially hazardous chemicals, so it’s important to take proper safety precautions and work in a well-ventilated area. Nitrocellulose lacquer is commonly used as a finish for musical instruments and woodworking projects. Here’s a basic recipe for making nitrocellulose lacquer:

Ingredients and Materials:

1. Nitrocellulose Flakes: You can purchase these from chemical supply stores or online. Nitrocellulose comes in various grades, and the choice of grade can affect the lacquer’s properties.
2. Solvents: You’ll need solvents to dissolve the nitrocellulose flakes. Common solvents for nitrocellulose lacquer include acetone, butyl acetate, and ethyl acetate. Choose a solvent based on your specific requirements for drying time and finish properties.
3. Plastic or Glass Container: Use a container made of plastic or glass to mix and store the lacquer. Do not use metal containers as nitrocellulose can react with metal.
4. Measuring Equipment: You’ll need accurate measuring equipment such as graduated cylinders or measuring cups.

Instructions:

1. Safety Precautions:
   • Work in a well-ventilated area, preferably with a fume hood.
   • Wear appropriate personal protective equipment, including gloves and safety goggles, to protect your skin and eyes.
   • Keep all open flames, sparks, and sources of heat away from the work area, as nitrocellulose is flammable.
2. Weigh Nitrocellulose Flakes:
   • Measure the desired amount of nitrocellulose flakes based on the quantity of lacquer you want to make. The specific ratio of nitrocellulose to solvent can vary depending on the desired consistency and properties of the lacquer. Start with a small batch to experiment.
3. Mix with Solvent:
   • Place the measured nitrocellulose flakes into your container.
   • Add the chosen solvent gradually while stirring continuously. The amount of solvent needed depends on the desired consistency and viscosity of the lacquer. A common ratio is around 1:1 (nitrocellulose to solvent by weight), but you can adjust it to your preference.
4. Dissolve Nitrocellulose:
   • Stir the mixture until the nitrocellulose flakes have completely dissolved in the solvent. This may take some time and patience.
5. Filter the Lacquer:
   • To remove any undissolved particles or impurities, strain the lacquer through a fine mesh strainer or cheesecloth into a clean container.
6. Test and Adjust:
   • Test the lacquer on a small sample surface to check its consistency, drying time, and finish. Adjust the lacquer’s properties by adding more nitrocellulose or solvent as needed.
7. Store the Lacquer:
   • Seal the container tightly to prevent the lacquer from evaporating or drying out. Store it in a cool, dry place.

Please note that working with nitrocellulose and solvents can be hazardous, and proper safety measures should always be followed. Additionally, nitrocellulose lacquer production may be regulated or restricted in certain regions due to safety and environmental concerns. Be sure to check local regulations before making or using nitrocellulose lacquer.